Laboratory jaw crusher
Equipment introduction: laboratory jaw crusher is a kind of high-quality crushing equipment, its purpose is: under the action of mechanical force, the hard large particle material will be broken into small particles of specified size. This equipment is compact and reasonable in structure, strong in overall rigidity, low in noise, and easy to adjust the discharging force. It can adjust the gap of discharging port in real time and dynamically by adjusting the handle. The crushing chamber and feeding hopper adopt fully sealed structure, with beautiful appearance and good crushing effect.
Application: widely used in metallurgy, mining, coal, coking, chemical industry, cement, construction, highway, refractory and ceramic industries.
Applied Materials: coal, gangue, coke, limestone, pyrite, phosphate rock, basalt, barite, celestite, calcium carbide, etc.
Equipment advantages:
1. Beautiful appearance. The appearance of the brand-new upgrade, outstanding products in the industry, using spray design, products more beautiful!
2. Energy saving and environmental protection. Sealed design, can be equipped with dust interface, meet the requirements of environmental protection, no dust pollution!
3. Loss reduction and noise reduction. Every detail of the product is made by wire cutting and fine manufacturing of large-scale CNC grinder. The operation is stable, the wear is reduced, and the noise is as low as 40 dB!
4. Fine crushing. Equipped with scale adjustment device, the discharge particle size is adjusted by the adjustment device, the discharge is more uniform, to ensure the accuracy of the sample size!
5. Safe to use. Equipped with short-circuit, overload, leakage protection device, realize small fault trip, use more safe!
6. Tailored. Manufacturers have independent research and development, production, customized conditions, according to environmental protection requirements, site requirements, color requirements and other customized products needed!
Working principle: the working mode of this series of crushers is curved extrusion type. Its working principle is: the motor drives the belt and pulley to make the moving jaw move up and down through the eccentric shaft. When the moving jaw rises, the angle between the elbow plate and the moving jaw becomes larger, so as to push the moving jaw plate close to the fixed jaw plate, and at the same time, the material is crushed or split to achieve the purpose of crushing; When the movable jaw goes down, the angle between the elbow plate and the movable jaw becomes smaller, and the movable jaw plate leaves the fixed jaw plate under the action of the pull rod and the spring. At this time, the crushed materials are discharged from the lower opening of the crushing cavity. With the continuous rotation of the motor, the jaw of the crusher moves periodically to crush and discharge the material, so as to realize mass production.
|
Model |
Feed
Opening
(mm) |
Max.
Feeding
Size
(mm) |
Adjusting
Range Of
Discharge
Opening
(mm) |
Capacity
(t/h) |
Rotation
Speed Of
Eccentric
Shaft
(r/min) |
Motor
Power
(KW) |
Total
Weight
(t) |
Dimensions
(mm) |
|
LZPE-150*250 |
150*250 |
125 |
10-40 |
1-3 |
250 |
5.5 |
0.6 |
720*660*850 |
|
LZPE-250*400 |
250*400 |
210 |
20-60 |
3-13 |
300 |
15 |
2.8 |
1300*1090*1270 |
|
LZPE-400*600 |
400*600 |
340 |
40-100 |
15-40 |
275 |
30 |
5.7 |
1730*1730*1630 |
|
LZPE-500*750 |
500*750 |
425 |
50-100 |
20-70 |
275 |
55 |
10.3 |
1980*2080*1870 |
|
LZPE-600*900 |
600*900 |
520 |
65-130 |
50-150 |
250 |
75 |
15.5 |
2290*2290*2400 |
|
LZPE-750*1060 |
750*1060 |
630 |
80-140 |
80-220 |
250 |
110 |
28 |
2660*2430*2800 |
|
LZPE-900*1200 |
900*1200 |
860 |
230-290 |
200-250 |
200 |
132 |
31 |
3380*2870*3330 |
|
LZPE-1200*1500 |
1200*1500 |
1100 |
350-360 |
250-400 |
180 |
160 |
51 |
4200*3300*3500 |
Our Services
(1) Select equipment model;
(2) Design and manufacture products according to clients' special requirement;
(3) Train technical personnel for clients.
2. Serivces during the sale:
(1) Pre-check and accept products ahead of delivery;
(2) Help clients to draft solving plans;
(3) Guide clients how to install equipment successfully without problem.
3. After-sale services:
(1) Assist clients to prepare for the first construction scheme;
(2) Install and debug the equipment;
(3) Train the first-line operators on site.
Profile
Shicheng Oasis Mineral Equipment Manufacturing Co., Ltd. is an import-export trade enterprise engaged in the production, sale and installation of mineral equipment, environmental protection equipment, hardware and machinery. Our company has been approved for registration by relevant departments, and can provide users with project design, process design and uniform and non-uniform design services.
We manufacture crushers, sand makers, mine selection equipment and gold washing machine and sand washing machine and laboratory equipment. Our main series include shaking tables, jiggers, spiral chutes, flotation machines, spiral classifiers, ball mills, mixing tanks, feeding machines, vibrating screens, crushers, sand pumps, magnetic separators, hydraulic graders, hydraulic cyclones, sand machines, laboratory sand pumps, laboratory shakers, laboratory spiral chutes, laboratory flotation machines, laboratory ball mills, laboratory crushers, laboratory magnetic separators, laboratory mixing barrels, grinding machines and vacuum filters.
We are able to make products according to customers' requirements. Our machines are widely used to separate iron, copper, gold, silver, lead, molybdenum, tungsten, manganese and other rare and precious metals. Our products are now widely used in metallurgical, mining, chemical, construction, coal processing, refractory and research fields.
1.Q:What Information needed to get accurate quotation and proposal?
A:1). What type is the mining? Is it rock stone? or it is sand?
2). If rock stone, what is the general particle size(mm) of the raw ore?
3). What is the handling capacity (tons per hour) you need?
4) .What is the elements of the raw ore? How much percent % of each minerals?
2.Q:Can we send the mineral samples to you to run the ore-dressing experiment test?
A:?Yes, we can run the ore-dressing experiment for our customers. After the test, we will give you the reasonable flowchart, suitable solution and equipment selection. etc. based on the test results.
3.Q:What about warranty of the equipment? Any spare parts supplied?
A:The warranty period of?OASIS?equipment is 12 months. And of course we will supply the spare parts to you for life-long time at lowest cost.
4.Q: The reason you choose OASIS?
A:1). Professional manufacturer of supplying mining equipment, Ore beneficiation equipment and mining dryers.?
2). Experienced and professional R&D team and manufacturing team.
3). Professional sales team consisted of dedicated, dynamic and innovative staff with international version.
4). Professional logistics service ensuring safety and timely delivery of products all over the world.
){kind=link}